
Commercial Door Repair vs. Replacement: A Cost Guide for Denver Business Owners
By Denver Commercial Doors
When your commercial door starts dragging, refusing to latch, or letting in a blast of cold air every time a customer walks in, you have one big question: should you repair it or replace it?
For Denver business owners and property managers, the answer comes down to cost, safety, and how many years of service the door has left. At Denver Commercial Doors, we help clients across the Front Range make this call every week. Here is an honest breakdown of what repairs and replacements typically cost in the Denver Metro area, and how to know which option makes the most financial sense.
Note: The price ranges below are general estimates for the Denver Metro market. Final pricing depends on door size, hardware brand, frame condition, and site access. For an exact number, request a free estimate.
Typical Commercial Door Repair Costs in Denver
Most commercial door problems are hardware problems, not door problems. That is good news, because hardware repairs are far cheaper than a full replacement.
| Repair | Typical Denver Cost Range |
|---|---|
| Door closer adjustment | $125 to $250 |
| Surface-mounted door closer replacement | $350 to $700 |
| Concealed overhead closer replacement | $500 to $1,000 |
| Bottom pivot replacement (storefront door) | $350 to $750 |
| Continuous hinge installation | $600 to $1,200 |
| Panic bar / exit device replacement | $600 to $1,500 |
| Lock cylinder or deadbolt replacement | $150 to $450 |
| Weatherstripping and door sweep replacement | $150 to $400 |
| Automatic door operator repair | $300 to $1,200 |
These repairs typically take a few hours and can often be completed in a single visit, since our trucks carry common commercial door hardware from brands like LCN, Von Duprin, and Norton.
Typical Commercial Door Replacement Costs in Denver
Replacement makes sense when the door slab or frame itself is damaged beyond repair. Costs vary widely depending on the type of door:
| Replacement | Typical Denver Cost Range (Installed) |
|---|---|
| Hollow metal door (slab only, existing frame) | $1,200 to $2,500 |
| Hollow metal door and frame | $2,500 to $4,500 |
| Aluminum glass storefront door (single) | $3,000 to $6,000 |
| Aluminum storefront door pair | $5,500 to $10,000 |
| Fire-rated door and frame assembly | $2,500 to $5,500 |
| Automatic sliding door system | $8,000 to $15,000+ |
Want to compare door types before deciding? Read our guide on hollow metal vs. aluminum storefront doors.
When Repair Is the Smarter Choice
In our experience, most commercial doors can be repaired. Repair is usually the right call when:
- The door slab and frame are structurally sound. No rust-through, warping, or crushed corners.
- The problem is isolated to hardware. Slamming, dragging, and latching issues are almost always caused by a worn closer, pivot, or hinge. Our guide to common commercial door hinge problems covers the usual suspects.
- The door still meets code. If the door is ADA compliant and fire-rated where required, there is no regulatory reason to replace it.
- The repair costs less than 50% of a replacement. This is a good rule of thumb. If a repair is a fraction of replacement cost and buys you several more years, repair it.
When Replacement Is the Smarter Choice
Sometimes repairing an old door is just throwing good money after bad. Consider commercial door replacement when:
- The frame is bent or damaged. Forced-entry attempts, vehicle impacts, and years of wind load can twist a frame so badly that no hinge or closer will keep the door aligned.
- Rust or corrosion has set in. Denver’s freeze-thaw cycles and de-icing salts are brutal on the bottom of hollow metal doors and frames. Once rust eats through, replacement is the only permanent fix.
- You keep calling for repairs. If you have paid for three or more repairs on the same door in the past two years, the cumulative cost likely exceeds a new door.
- The door no longer meets code. Older doors may not satisfy current ADA accessibility requirements or fire door standards. Failing an inspection can be far more expensive than upgrading.
- Your energy bills are climbing. Old single-pane storefronts and poorly insulated doors leak heat during Colorado winters. A modern thermally broken storefront can noticeably cut heating costs.
- The door is 20+ years old. Most commercial doors are designed for roughly 20 to 30 years of service. Past that point, replacement parts can become hard to find.
Hidden Costs Denver Business Owners Should Consider
The sticker price is not the only cost of a failing door. Before deciding, factor in:
- Security risk. A door that does not latch reliably is an open invitation for break-ins.
- Liability. Slamming doors injure customers and employees, and dragging doors can violate ADA requirements.
- Lost business. A broken or stuck entrance sends customers to your competitor down the street.
- Emergency service premiums. Waiting until the door fails completely usually means paying for an after-hours emergency door repair call.
Our Honest Recommendation
At Denver Commercial Doors, we will always tell you if a repair will do the job. We would rather earn your trust with a $300 fix today than sell you a $5,000 door you do not need. But when a door is truly at the end of its life, we will show you exactly why and give you clear, upfront options.
We proudly serve businesses throughout Denver, Broomfield, Arvada, Lakewood, Aurora, Westminster, and the rest of the Front Range.
Not sure whether to repair or replace? Contact Denver Commercial Doors today for a free on-site evaluation and a written estimate for both options, so you can make the decision that is right for your budget.
